Enjoy the value - added tax preferential policies of the new wall materials directory2017/5/27 Current Location：Home-->News
Enjoy the value - added tax preferential policies of the new wall materials directory
One, brick
(A) non-clay sintered porous brick (in line with GB13544-2000 technical requirements) and non-clay sintered hollow brick (in line with GB13545-2003 technical requirements).
(B) concrete porous brick (in line with JC943-2004 technical requirements).
(C) autoclaved fly ash brick (in line with JC239-2001 technical requirements) and autoclaved gray sand hollow brick (in line with JC / T637-1996 technical requirements).
(Four) sintered porous brick (only the western region, in line with GB13544-2000 technical requirements) and sintered hollow brick (only the western region, in line with GB13545-2003 technical requirements).
The following are the same as the "
Second, the block class
(A) ordinary concrete small hollow block (in line with GB8239 - 1997 technical requirements).
(B) lightweight aggregate concrete small hollow block (in line with GB15229-2002 technical requirements).
(C) sintered hollow block (to coal gangue, rivers and lakes sludge, construction waste, shale as raw material, in line with GB13545-2003 technical requirements).
(4) autoclaved aerated concrete blocks (in line with GB / T11968-2006 technical requirements).
(5) gypsum block (in line with JC / T698-1998 technical requirements).
(6) fly ash small hollow block (in line with JC862-2000 technical requirements).
Third, the plate class
(A) autoclaved aerated concrete slab (in line with GB15762-1995 technical requirements).
(2) Lightweight slats for construction partitions (in accordance with JG / T169-2005 technical requirements).
(C) wire mesh polystyrene sandwich panels (in line with JC623-1996 technical requirements).
(4) gypsum hollow slab (in line with JC / T829-1998 technical requirements).
(5) glass fiber reinforced cement light porous partition board (referred to as GRC board, in line with GB / T19631-2005 technical requirements).
(6) metal surface sandwich panels. Metal surface hardened polyurethane sandwich panels (in line with JC / T868-2000 technical requirements); metal surface rock wool, slag cotton sandwich panels (in line with JC689-1998 technical requirements); metal surface hard polyurethane sandwich panels (in line with JC / T868-2000 technical requirements) JC / T869-2000 technical requirements).
(7) building plate. (Fiber reinforced calcium silicate board (in line with JC / T564-2000 technical requirements); fiber reinforced low alkalinity cement building plate (in line with JC / T626-1996 technology); fiber reinforced calcium silicate board (in line with JC / T564-2000 technical requirements) Requirements); vinylon fiber reinforced cement flat (in line with JC / T671-1997 technical requirements); construction asbestos cement flat (in line with JC / T412 technical requirements).
Four, in line with national standards, industry standards and local standards of concrete brick, sintered insulation brick (block), hollow steel mesh within the partition wall, composite insulation brick (block), prefabricated composite wall panels (body), polyurethane foam Composite panels and special polyurethane as the material of the building wall.
One, brick
(A) non-clay sintered porous brick (in line with GB13544-2000 technical requirements) and non-clay sintered hollow brick (in line with GB13545-2003 technical requirements).
(B) concrete porous brick (in line with JC943-2004 technical requirements).
(C) autoclaved fly ash brick (in line with JC239-2001 technical requirements) and autoclaved gray sand hollow brick (in line with JC / T637-1996 technical requirements).
(Four) sintered porous brick (only the western region, in line with GB13544-2000 technical requirements) and sintered hollow brick (only the western region, in line with GB13545-2003 technical requirements).
The following are the same as the "
Second, the block class
(A) ordinary concrete small hollow block (in line with GB8239 - 1997 technical requirements).
(B) lightweight aggregate concrete small hollow block (in line with GB15229-2002 technical requirements).
(C) sintered hollow block (to coal gangue, rivers and lakes sludge, construction waste, shale as raw material, in line with GB13545-2003 technical requirements).
(4) autoclaved aerated concrete blocks (in line with GB / T11968-2006 technical requirements).
(5) gypsum block (in line with JC / T698-1998 technical requirements).
(6) fly ash small hollow block (in line with JC862-2000 technical requirements).
Third, the plate class
(A) autoclaved aerated concrete slab (in line with GB15762-1995 technical requirements).
(2) Lightweight slats for construction partitions (in accordance with JG / T169-2005 technical requirements).
(C) wire mesh polystyrene sandwich panels (in line with JC623-1996 technical requirements).
(4) gypsum hollow slab (in line with JC / T829-1998 technical requirements).
(5) glass fiber reinforced cement light porous partition board (referred to as GRC board, in line with GB / T19631-2005 technical requirements).
(6) metal surface sandwich panels. Metal surface hardened polyurethane sandwich panels (in line with JC / T868-2000 technical requirements); metal surface rock wool, slag cotton sandwich panels (in line with JC689-1998 technical requirements); metal surface hard polyurethane sandwich panels (in line with JC / T868-2000 technical requirements) JC / T869-2000 technical requirements).
(7) building plate. (Fiber reinforced calcium silicate board (in line with JC / T564-2000 technical requirements); fiber reinforced low alkalinity cement building plate (in line with JC / T626-1996 technology); fiber reinforced calcium silicate board (in line with JC / T564-2000 technical requirements) Requirements); vinylon fiber reinforced cement flat (in line with JC / T671-1997 technical requirements); construction asbestos cement flat (in line with JC / T412 technical requirements).
Four, in line with national standards, industry standards and local standards of concrete brick, sintered insulation brick (block), hollow steel mesh within the partition wall, composite insulation brick (block), prefabricated composite wall panels (body), polyurethane foam Composite panels and special polyurethane as the material of the building wall.